*****************************************
                          Device Simulator for Windows version 1.01

                          (c) Simulation Systems Ltd. 2007
                          *****************************************

This README file contains the latest information about Device Simulator for Windows 1.01 For complete usage instructions please refer to the online help.
 
TABLE OF CONTENTS
-----------------
 - Important Notices
 - Installation
 - Minimum Requirements & Configuration
 - Future Developments
 - Support & Feedback

-------------------
 IMPORTANT NOTICES
-------------------
* IMPORTANT: We recommend that Device Simulator (WinDevsim) is run under Windows NT/2000/XP.
  Although Windows 95/98/Me is supported, the limited timing capabilities of these operating 
  systems may produce unexpected results due to WinDevsim's dependance on high resolution timing.   
   
   If you are using windows 95/98/Me please ensure you do not:
   - Use a PC slower then the recommended specification.
   - Run any other applications or unnecessary memory resident programs (i.e. anti virus).
   - Play with the user interface extensively during long operations.

 * IMPORTANT: WinDevsim cannot operate accurately if the serial FIFO buffers are enabled.
   This can cause misleading results and error events.  It is important that FIFO buffers 
   are disabled after installing WinDevsim.  Please read the "HOWTO - Disabling FIFO's.pdf" 
   document for instructions.  This can be found in the WinDevsim "docs" directory.

 * IMPORTANT: When running WinDevsim it is recommended that all other applications are closed
   and it may be necessary disable any memory resident applications such as anti-virus software.

 * IMPORTANT: Please do not remove any of the WinDevsim files from their installed location as
   the software will not function correctly and any future upgrades may experience problems
   installing.

 * IMPORTANT: Using the SSL NMCS2 RS232/485 converter (Stores Code: 99-9340-06) may cause
   WinDevsim to detect a single short packet on mode entry or driver re-configuration.
   This is normal behaviour and should only occur on driver re-configuration and not affect
   any WinDevsim operations.

 * WinDevsim will automatically upgrade any existing version.  However it is recommended 
   that remove any previous installations are manually removed before continuing.  This can be
   done by selecting "Add/Remove Programs" in windows control panel and clicking on the "Remove" 
   button next to the current Tester installation.

 * Please regularly check the WinDevsim web site:
   (http://www.simulation-systems.co.uk/windevsim) 
   for software updates and additional downloadable content. Upgrades may include
    
    - Configuration Files
    - Plan Reader Files
    - Manual & FAQ Files
    - Script Files
    - HOWTO Files

--------------
 INSTALLATION 
--------------

   WinDevsim will automatically install from the SSL HA Maintenance Tools CD.  To install
   WinDevsim insert the SSL HA Maintenance Tools CD into the drive and the setup program should
   launch automatically.  If Auto-Run has been disabled, run the CDROM.EXE from your CD-ROM
   drive (e.g. D:\Setup.exe).

   Adobe Acrobat Reader also needs to be installed to access the WinDevsim user manual.
   This product is also available on the HA Maintenance Tools CD.

   To install WinDevsim from a file downloaded from the Internet, run the self-extracting
   executable file and follow the on-screen instructions.

   NOTE: WinDevsim does not require a CD-KEY but will require activation.

-------------------------------------
 MINIMUM REQUIRMENTS & CONFIGURATION
-------------------------------------

* Minimum Specification:
   - IBM Compatible PC.
   - Pentium P4 1000MHz or equivalent
   - 128 MB RAM
   - MS Windows 98, or later versions of Windows (NT/2000/XP recommended).
   - 20MB free disk space.
   - CD-ROM drive
   - At least 1 standard RS232 COM port
   - 1024x768 resolution

 * Recommended Specification:
   - Pentium P4 1500Mhz or equivalent
   - 256 MB RAM
   - Windows NT/2000/XP (best under Windows XP)
   - 1280x1024 resolution

 * Windows XP is the recommended operating system.

 * Please note that it is recommended that WinDevsim be run on no less then a 1000Mhz PC.
   Lower specification PC's may experience performance related issues.

 * 20MB of hard disk space is required for product installation, additional hard disk
   capacity may be required for logs and downloadable content.

 * At least one standard RS232 COM port is required.  WinDevsim also supports
   USB/PCMCIA serial port adapters.

 
---------------------
 FUTURE DEVELOPMENTS
---------------------

* Future Version of WinDevsim may be required to support a UDP/IP (User DataGram Protocol/
  Internet Protocol) interface. Initially this is likely to encapsulate the standard NMCS2
  5-byte protocol. Eventually, enhancements to the 5-byte protocol may be incorporated into
  the UDP/IP protocol.
 
--------------------
 SUPPORT & FEEDBACK
--------------------

   WinDevsim includes a comprehensive user manual which should answer most questions. However  
   if you experience any problems, usability issues or have any comments for future developments
   please let us know by contacting us:

   Simulation Systems Ltd
   Unit 12, Market Industrial Estate
   Yatton,
   Bristol,
   BS49 4RF

   Tel:       (01934) 838803
   Fax:       (01934) 876202
   Web:       http://www.simulation-systems.co.uk/			
   E-mail:    windevsim.support@simulation-systems.co.uk